Motorcycle Luggage  
Motorcycle Accessories  
Specials 
Product Reviews
Products Coming Soon
Technical Information
Product Installation
Quality Design
Group Discounts
Customer Photos
Fan Mail
Sport Bike Links

Elite / Sport Zip Pak Installation - Follow these 4 simple steps in order to install your Zip Pak Bags from Luggage Locker!


Step #1: Unlock and remove the rear passenger seat...


Step #2: Install the Luggage Locker in the same manner as the rear passenger seat it replaces... Step #3: Push the lock pin end firmly in such a manner that it completely engages the latch...


Step #4: Installation Complete!



Elite / Sport Seat Sak Installation - Follow these simple 4 steps to install your Elite / Sport Seat Sak from Luggage Locker!


Step #1: Unlock and remove the seat...


Step #2: Slide Seat Sak on over the
rear of the seat...
Step #3: Secure and tighten the Velcro flap and the cinch straps...


Step #4: Replace and lock the seat back in it's original position...Installation Complete!



Tank Locker Installation - Follow these 6 simple steps in order to install your Tank Locker Bag from Luggage Locker!


Step #1: Remove the bolts around the perimeter of your bikes gas cap that match the holes drilled in the base of
the Tank Locker system lock ring.
Step #2: Place the lock ring over the gas cap, aligning the drilled holes with the holes from which you removed the stock mount bolts around the edge of the gas cap.


Step #3: Using the bolts provided with the lock ring, bolt the ring in place around the gas cap, being careful NOT
to overtighten the bolts against the
lock ring. The lock ring is now installed.
Step #4: Place the baseplate (shown with bag removed) in the 11:00 position, and interface the ring found on the bottom on the baseplate with the lock ring. Be sure the baseplate is fulley engaged with the lock ring


Step #5: Turn the baseplate
CLOCKWISE until the plate is in the
12:00 position…locked against the
lock ring bayonet mount pins.
Step #6: Depress the push button on the lock. This engages the lock pin with the lock pin hole located on the baseplate mount cap. It will require the supplied key to unlock this, allowing you to turn the baseplate COUNTERCLOCKWISE and pull straight up to disengage the baseplate from the lock ring.

 

 
2004 Luggage Locker. All Rights Reserved. All Luggage Locker products are patented or patent pending.
Site design & eCommerce by Rodeck Design